Search results

Path: https://www.kan.de/en/publications/kanbrief/1/24/criticism-of-standards-for-gloves-and-clothing-providing-protection-against-pesticides

precise assessment of the degradation processes. Level of protection to EN ISO 27065 and ISO 18889 not sufficient EN ISO 27065 and ISO 18889 set out requirements for gloves and clothing worn by users of [...] . INRS is of the opinion that the...

Path: https://www.kan.de/en/publications/kanbrief/the-eu-and-standardization/kan-position-paper-on-en-iso-8041-causes-a-buzz

periodic verification testing to in-situ checks. EN ISO 8041 has an important function in the measurement of workplace vibration exposure. The EN ISO 5349-2 and ISO 2631-1 measurement standards specified in EU [...] KANBrief 3/10 KAN position...

Path: https://www.kan.de/en/publications/kanbrief/new-guideline-documents-on-ergonomics/the-new-en-iso-26800-basic-ergonomics-standard

been summarized for the first time for all applications in a single standard: EN ISO 26800, published in November 2011. EN ISO 26800 “Ergonomics – General approach, principles and concepts” serves as a generic [...] the guiding concept behind E...

Path: https://www.kan.de/en/publications/kanbrief/industry-40-vision-or-reality/en-iso-27500-the-human-centred-organization-rationale-and-general-principles

Guidance on social responsibility, and EN ISO 26800, Ergonomics – General approach, principles and concepts. EN ISO 27500 presents the principles of human-centredness in a concise form. It is intended [...] rights. EN ISO 27500 takes account of...

Path: https://www.kan.de/en/publications/kanbrief/safety-of-mobile-machinery/earthmoving-machinery-better-visibility-in-sight

2015. At the same time, a reference to the amended version of ISO 5006 is to be added to EN 474-1. Future prospects If the provisions of ISO 5006 are amended as described, this would constitute a major [...] to which EN 474-1 gives rise....

Path: https://www.kan.de/en/publications/kanbrief/the-office-work-of-today/mental-workload-the-en-iso-10075-series-of-standards

KANBrief 2/19 Mental workload: the EN ISO 10075 series of standards The reasoning behind the development of a series of standards specifically addressing mental workload is partly that this workload is [...] interviews, observation, etc.) that...

Path: https://www.kan.de/en/publications/kanbrief/safety-of-machinery/machine-safety-standards-unfinished-business-following-adaptation-to-the-new-directive

and the European machine construction sector. Extending EN 954-1’s presumption of conformity was superfluous: the standard’s replacement, EN ISO 13849-1, already contains its predecessor and describes [...] Deficiencies in the state of the art...

Path: https://www.kan.de/en/publications/kanbrief/safety-of-mobile-machinery/have-government-policy-and-globalization-led-to-too-much-time-pressure

a major interest in the subject area have made comments ( ISO/IEC Directives , Part 1, Consolidated ISO Supplement – Procedures specific to ISO, Fifth edition, 2014). These criteria, which are open to [...] Since 1991, co-operation between ISO...

Path: https://www.kan.de/en/publications/kanbrief/new-guideline-documents-on-ergonomics/test-finger-tested-and-found-to-be-too-short

design of the test finger, a further 5 mm must be added to the length. EN ISO 13857 governing safety distances on machines (EN ISO 13857:2008: Safety of machinery – safety distances to prevent hazard zones [...] German values, data based upon I...

Path: https://www.kan.de/en/publications/kanbrief/2/23/standardization-in-additive-manufacturing

Materials. Nicola Helfer helfer@kan.de 1 EN ISO 12100:2011, Safety of machinery – General principles for design – Risk assessment and risk reduction 2 E DIN EN ISO/ASTM 52938-1 Additive manufacturing of [...] Detailed specifications in...